Understanding The Construction Process

« Back to Home

Three Issues That May Need To Be Addressed With A Used Mower Before You Use It

Posted on

When you purchase a used riding mower from someone, there are some maintenance issues that may need to be addressed. It is best to have the mower looked over by a repair company, before you try to use it, to make sure that it is in good working condition. The following guide walks you through a few things that they need to be addressed, before the mower will be as useful as it can be.

The Tires May Need to be Replaced

If the tires on the mower do not have enough tread on them or are overly worn, it may be difficult to get around your yard, when you try to mow. It is best to have all of the tires replaced, if the mechanic notices that a few are not in good condition. This will allow you to be sure that they wear equally, when you start to use them.

The Blade May Need to be Replaced

The blade of a lawnmower will wear down over time. When it becomes nicked or dented, it will not cut the grass evenly, which can lead to a lot of irritation in the long run. It is best to make sure that the mower blade is replaced, before you try to use the mower, to ensure that it cuts as evenly as it possibly can.

The Seat Sensor May Need to be Replaced

Riding lawn mowers have a sensor attached to them that indicates when someone is sitting on the seat and when they are not. This is to ensure that the mower cuts off when someone comes off of the seat, to decrease the chances of someone getting hurt accidentally. If the sensor is not operating properly, the lawnmower may not turn on at all. The mechanic will look at the sensor, and check to see if it is operable or not.

Most issues that may arise with the lawn mower will be very affordable to address. The mechanic will be able to replace any filters and refill any fluids in the mower, while it is in the shop, so you can be sure that it is ready to go when you get it to your house. When you first start the mower, it is best to allow it to run for a minute or two, before you turn on the blades, so you can be sure that the engine has plenty of time to warm up and for the fluids to pass through the engine to make it well lubricated.

For more information, talk to companies like Potestio Brothers Equipment, Inc.


Share